Growth and microanatomy of the paranasal sinuses in two species of New World monkeys.

Paranasal sinuses of living apes and humans grow with positive allometry, suggesting a novel mechanism for bone enlargement. Here, we examine the paranasal sinuses of the owl monkey (Aotus spp.) and a tamarin (Saguinus midas) across postnatal development. The prediction that paranasal sinuses grow disproportionately faster than the main nasal chamber is tested. We used diffusible iodine-based contrast-enhanced computed tomography and histology to study sinuses in eight Aotus and three tamarins ranging from newborn to adult ages. Sinuses were segmented at the mucosa-air cavity interface and measured in volume. All sinuses were lined by a ciliated respiratory epithelium, except for the ethmoid air cells in Aotus, which are lined in part by olfactory epithelium. An age comparison indicates that only the maxillary sinus and ethmoid air cells are present in newborns, and two additional sinuses (invading the orbitosphenoid and the frontal bone), do not appear until late infancy or later. Comparing newborns and adults, the main nasal airway is 10 times larger in the adult Aotus and ~ 6.5 times larger in adult Saguinus. In contrast, the maxillary sinus far exceeds this magnitude of difference: 24 times larger in the adult Aotus and 46 times larger in adult Saguinus. The frontal sinuses add significantly to total paranasal space volume in both species, but this growth is likely delayed until juvenile age. Results suggest ethmoid air cells expand the least. These results support our prediction that most paranasal sinuses have a distinctly higher growth rate compared to the main nasal chamber.

Cone-beam computed tomographic analysis of maxillary sinus septa among Yemeni population: a cross-sectional study.

BACKGROUND: Maxillary sinus septa increase perforation risk of Schneiderian membrane during the sinus floor elevation (SFE). Cone Beam Computed Tomography (CBCT) allows for a more precise assessment of the septal position; thus, preoperative CBCT analysis is substantial to avoid possible complications. This study aims to investigate the 3D characteristics of the maxillary sinus septa based on CBCT images. To our knowledge, no study reported the CBCT-based investigation for the sinus septa among Yemeni population. MATERIALS AND METHODS: This is a retrospective cross-sectional analysis of 880 sinus CBCT images 440 patients. The septa prevalence, locations, orientations, morphology, and associated factors were analyzed. The effect of age, gender, and dental status on the sinus septa and the relationship between sinus membrane pathology and sinus septa were also analyzed. Anatomage (Invivo version 6) was used for CBCT images analysis. Descriptive and analytical statistics were performed, and a P-value < 0.05 was significantly considered. RESULTS: The maxillary sinus septa were found among 63.9% of patients and 47% of sinuses. The average septa height was 5.2 mm. 15.7% of patients had septa in the right maxilla, 18% in the left, and 30.2% in both. Gender, age, and dental condition had no influence on the presence of septa, and septa presence did not influence sinus membrane pathology. Many septa originated from the floor (54.5%), located in the middle (43%), with coronal orientation (66%) and complete configuration (58.2%). CONCLUSION: Based on our findings, the septa prevalence, locations, orientations, and morphology were significant and equivalent to the highest recorded in the literature yet. Thus, when sinus floor elevation is planned, CBCT imaging of the maxillary sinus is recommended for safe dental implantation.

Assessment of the prelacrimal recess in different maxillary sinus pneumatizations in relation to endoscopic prelacrimal recess approaches: a computed tomography study.

PURPOSE: To assist in planning before the endoscopic prelacrimal recess (PLR) approach, we aimed to investigate the relationship between morphometry and variations of PLR in maxillary sinus (MS) pneumatizations. METHODS: Retrospective analysis of the paranasal sinus computed tomography images of 150 patients was conducted to determine the pneumatization patterns of the MS, PLR variations, and the applicability of the PLR approach. The results were compared based on lateralization, gender, and age groups. RESULTS: The PLRwidth, the anteroposterior diameter of the nasolacrimal duct (NLD), the vertical and horizontal diameters of the MS were the highest in hyperplasic MS, and decreased significantly with increasing age (p = 0.005, p = 0.017, p = 0.000), respectively. Most of the morphometric measurements were higher in hyperplasic MS, while the medial wall thickness of PLR was higher in hypoplasic MS. The PLRwidth for feasibility of the PLR approach were Type I (48%) in hypoplasic MS and Type III (80%) in hyperplasic MS (p < 0.001), respectively. The PLR medial wall thickness was higher in Type I, while the piriform aperture angle (PAA), MS volume, length, and slope of the NLD were higher in Type III PLRwidth (p = 0.000), respectively. The highest anterior and separation-type variations of the PLR were observed in hyperplasic MS, whereas 31.0% of hypoplasic MS had no PLR (p < 0.001). CONCLUSION: This study revealed that PLRwidth and PAA were the highest in hyperplasic MS, which allows the endoscopic PLR approach to be performed more easily. For safer and uncomplicated surgery, surgeon should be aware of the PLR anatomy in different MS pneumatization patterns.

Relación entre el seno maxilar y ápices de dientes postero- superiores con tomografía computarizada de haz cónico / Relationship between the maxillary sinus and apices of posterior-superior teeth using cone beam computed tomography

El conocimiento de la relación entre el seno maxilar y los ápices de los dientes posterosuperiores es fundamental para evitar complicaciones frente a distintos tratamientos. Estudio descriptivo de corte transversal, con muestra por conveniencia de 383 imágenes de raíces de dientes posterosuperiores obtenidas por medio de tomografía computarizada de haz cónico (TCHC) de un centro radiológico en Viña del Mar, Chile. Cada raíz fue clasificada según su relación vertical con el seno en 4 categorías (0: ápice no se encuentra en contacto con contorno inferior del seno; 1: ápice en contacto con seno; 2: ápice lateralmente al seno; 3: ápice se protruye en seno). Además se midió su distancia en mm. Los datos fueron analizados con estadística descriptivas. El diente más lejano al seno maxilar fue el primer premolar superior (4.2 mm), seguido por el segundo premolar superior (1 mm). En el primer molar superior la raíz más lejana fue la mesio-vestibular (MV) 1mm, seguida por la raíz disto-vestibular (DV) 0.6mm y la raíz palatina (P) -1mm. En el segundo molar superior la raíz más lejana fue P 0.4mm, luego la DV 0.3mm, y MV -0,11mm. En cuanto a las categorías, se observó que la mayoría de las raíces se encuentran alejadas del seno siendo la raíz P del primer molar superior y la raíz MV del segundo molar superior las que se encuentran mayormente protruidas (42 % y 26 % respectivamente). El primer premolar es el diente posterosuperior que se encuentra más alejado del seno maxilar y a medida que se avanza hacia posterior hay tendencia a disminuir la distancia entre los ápices y el seno maxilar.

SUMMARY: Knowledge of the relationship between the maxillary sinus and the apices of the upper posterior teeth is crucial to avoid complications when considering different treatments. A descriptive cross-sectional study was carried out, with a convenience sample of 383 images of upper posterior teeth roots, obtained by means of cone beam computed tomography (CBCT) from a radiological center in Viña del Mar, Chile. Each root was classified according to its vertical relationship with the sinus into 4 categories (0: apex is not in contact with the lower contour of the sinus; 1: apex is in contact with the sinus; 2: apex laterally to the sinus; 3: apex protrudes in sinus). In addition, its distance was measured in mm. The data were analyzed with descriptive statistics. The tooth farthest from the maxillary sinus was the maxillary first premolar (4.2 mm), followed by the maxillary second premolar (1 mm). In the upper first molar, the most distant root was the mesiobuccal (MV) 1mm, followed by the distobuccal root (DV) 0.6mm and the palatal root (P) -1mm. In the upper second molar, the furthest root was P 0.4mm, then DV 0.3mm, and MV -0.11mm. In reference to the categories, it was observed that most of the roots are far from the sinus, with the P root of the first upper molar and the MV root of the second upper molar being the most protruding (42 % and 26 % respectively). The first premolar is the posterior maxillary tooth that is furthest from the maxillary sinus and as one advances posteriorly there is a tendency to decrease the distance between the apices and the maxillary sinus.

Análisis bidimensional de la permeabilidad de vías aéreas con el tamaño de senos maxilares y su relación con el desarrollo de la clase esqueletal en una población mexicana / Two-dimensional analysis of airway permeability with maxillary sinus size and its relationship with the development of skeletal class in a Mexican population

Comparar la permeabilidad de las vías aéreas y el tamaño de los senos maxilares en relación con la clase esqueletal. se midieron 90 radiografías lateral de cráneo, divididas en 3 grupos, comparando las 3 clases esqueletales, las cuales se determinaron con la medida ANB de Steiner, y estas a su vez en dos subgrupos que fueron hombres y mujeres, en las cuales se utilizó el análisis de McNamara para el análisis de vías aéreas y para el área del seno maxilar se tomaron dos medidas una antero-posterior y cefálica-caudal. Al comparar los hombres con las mujeres se identificó significancia estadística en vía área superior de clase II (p=≤0.017), vía aérea inferior de clase III (p=≤0.006). Al comparar las clases esqueletales en hombres se identificó diferencias en la vía aérea superior en las clases I vs III (p=≤0.05), inferior en la clase I vs III (p=≤0,001) y II vs III (p=≤0.044). Con respecto a mujeres se identificó significancia en la vía aérea superior al comparar la clase I vs II (p=≤0,043), vía aérea inferior en la clase II vs III (p=≤0.05), longitud del seno maxilar al comparar clase I vs II (p=≤0.017). Entre la clase I esqueletal y la clase II, el tamaño de los senos maxilares resulto menor en longitud en las mujeres de clase II esqueletal. Entre la clase I y clase III esqueletal en hombres, se encontró una longitud menor en la vía aérea superior e inferior en la clase I. Las vías aéreas resultaron en menor tamaño en sujetos de clase II.

SUMMARY: To compare the airway permeability and the size of the maxillary sinuses in relation to the skeletal class. 90 lateral skull radiographs were divided into 3 groups, comparing the 3 skeletal classes, which were determined with Steiner's ANB measurement, and these were once in two subgroups that were men and women, in any McNamara analysis was used for the analysis of airways and for the maxillary sinus area measurements were made an antero-posterior and cephalic-caudal. When comparing males with females, statistical significance was identified in the upper class II route (p=≤0,017), lower class III airway (p=≤0.006). At least skeletal classes in men, differences were identified in the upper airway in classes I vs III (p=≤0.05), lower in class I vs III (p=≤0.001) and II vs III (p=≤0.044). With respect to women, significance was identified in the upper airway when comparing class I vs II (p=≤0.043), lower airway in class II vs. III (p=≤0.05), maxillary sinus length to class I vs II (p=≤0.017). Between skeletal class I and class II, maxillary sinus size was shorter in length in skeletal class II women. Between class I and skeletal class III in men, a lower length was found in the upper and lower airways in class I. The airways were found to be smaller in class II subjects.

Incidence of maxillary sinus septa in the saudi population.

BACKGROUND: The variability in the maxillary sinus anatomy makes dental implant planning challenging. One of the anatomical landmarks that could affect the decision for implant placement around the maxillary sinus is the sinus septa. This study aimed to retrospectively determine the prevalence, anatomical distribution, and morphology of the maxillary sinus septa. MATERIALS AND METHODS: This study included 309 CBCT images that were analyzed to determine the prevalence, height, location, and orientation of the maxillary sinus septa. Descriptive statistics, Mann‒Whitney U tests, and Kruskal‒Wallis tests were used for data analysis. RESULTS: A total of 618 maxillary sinuses were analyzed. Maxillary septa were present in 30% (n = 188) of the sinuses and in approximately 45% of the analyzed images. The mean height of the septa was 5.09 mm. The presence of bilateral septa was evident in 49 subjects (35.25%). Female subjects were significantly more likely to have only one septum (n = 67, 53.6%, p < 0.05). CONCLUSION: The presence of septa is very common, found in one-third to approximately half of the evaluated cases, which warrants careful examination before any surgical interventions to avoid possible complications.

Does the floor of the maxillary sinus affect tooth movement for premolar extraction space closure?

OBJECTIVE: The study investigated orthodontic tooth movement by comparing various horizontal and angular measures of the teeth having different sinus-root relationship (SRR) of patients undergoing first premolar extraction treatment protocols. MATERIALS AND METHODS: This retrospective cross-sectional study included 45 Taiwanese adult patients, classified as the control group (n = 15) and the sinus group (n = 30) according to SRR. The control group had type I SRR (sinus floor above the level connecting the buccal and palatal root apices), whereas the sinus group included patients with type V SRR (the buccal and palatal root displayed apical protrusion into the sinus floor). Morphology was identified using pretreatment orthopantomograms. Lateral cephalometric measurements were conducted before treatment (T1) and at debonding (T2). RESULTS: Post debonding, there were no statistically significant difference in the two groups. However, the incisors in the control group became marginally more upright than those of the sinus group, and the molars demonstrated tipping movement with minimal anchorage loss in the sinus group than in the control group. The total treatment time was not significantly different between the 2 groups. CONCLUSION: The study revealed that the sinus-root relationship does not affect the orthodontic tooth movement. However, a more extensive 3-D study with larger sample size is strongly recommended before coming to any conclusion. CLINICAL RELEVANCE: The lining of the floor of the maxillary sinus does not affect the orthodontic tooth movement.

The Use of 0° and 70° Endoscopes in Maxillary Antrostomy.

BACKGROUND AND OBJECTIVES: Performing an effective maxillary antrostomy is critical to improving chronic maxillary sinusitis symptomatology. Incomplete dissection of the uncinate process and failure to incorporate the natural drainage pathway may lead to recirculation and need for revision surgery. The purpose of this study is to determine if 70° endoscopes provide added value in determining incomplete dissection or residual disease. METHODS: Prospective study of 35 sinuses from 18 patients undergoing FESS for Chronic Rhinosinusitis (CRS) between 11/1/2020 and 4/30/2021. Two fellowship trained Rhinologists initially performed maxillary antrostomies exclusively using a 0° endoscope, then transitioned to a 70° endoscope. Surgeons completed a survey to assess completion of the antrostomy prior to use of 70° endoscope, sino-nasal anatomy, and difficulty of the operation. Intraoperative photographs before and after using a 70° endoscope were evaluated by a third party. Pre-operative CT scans were used to evaluate the sphenoid keel-caudal septum-nasolacrimal duct (SK-CS-NL) angle. RESULTS: Of 35 sinuses from 18 patients all 35 sinuses had CRS with 48.5% having nasal polyposis and 42.9% having active infection. There was residual inflammatory tissue in the anterior maxillary sinus, including polypoid tissue and uncinate process prior to using the 70° endoscope in 82.9% of sinuses. The natural drainage pathway was not incorporated into the dissection in 28.6% of sinuses before converting to 70° endoscope. Incomplete dissection with 0° endoscope was not associated with nasal polyposis (P = .086) or uncinate position (0.741). Narrow SK-CS-NL angles were associated with incomplete dissection of the anterior maxillary sinus with 0° endoscope (16.0° ± 3.0° vs 20.6° ± 3.2°; P = .013). CONCLUSION: Use of 70° endoscope in maxillary antrostomy may be beneficial in identifying and resecting disease within the anterior maxillary sinus that may otherwise be difficult to find using a 0° endoscope. This is especially true in patients with narrow nasolacrimal duct positioning.

Are maxillary sinus variations related to maxillary sinus diameters?

OBJECTIVES: The reasons why the maxillary posterior region is challenging for dentists are its structure and anatomical variations. For this reason, it is necessary to have complete knowledge about the anatomy of this region. In dentistry, necessary information for the desired evaluation in this region can be provided by CBCT. The fact that it provides a three-dimensional evaluation and has measurement reliability emphasizes its importance in surgical applications. The septa, haller cell, and accessory ostium are variations of the maxillary sinus. There are few studies in the literature examining the relationship between maxillary sinus diameters and its variations. The aims of this study are to determine the prevalence of maxillary sinus variations and the average of maxillary sinus diameters, to examine their relationships according to age and gender, and to evaluate the effects of maxillary sinus diameters on variations. METHODS: In this retrospective study, CBCT images of 212 patients were examined. The examined CBCT images were analysed and recorded in more than one section. Descriptive statistics, chi-square tests, independent t test, one-way Anova tests were used to evaluate the data. RESULTS: As a result, a statistically significant difference was observed between the variations, gender and age groups in terms of morphometric characteristics of the maxillary sinus. The most common variation was observed to be accessory ostium. CONCLUSIONS: The rate of patients with at least one anatomical variation was 77.8%. For this reason, a detailed analysis should be performed to avoid complications before surgical procedures are performed in the area.

Anatomical localization of posterior superior alveolar artery: A retrospective study by cone-beam computed tomography.

BACKGROUND: Familiarity with the anatomy of the arteries in the sinus wall is essential to prevent the perforation of the sinus membrane and bleeding during dental implant surgery. OBJECTIVES: The aim of the study was to evaluate the anatomical position of the posterior superior alveolar artery (PSAA), using cone-beam computed tomography (CBCT). MATERIAL AND METHODS: A total of 245 CBCT scans met the eligibility criteria for this cross-sectional study. The vertical distance from the lower border of the artery to the lower border of the sinus floor, the diameter of the artery, and the type of artery (intrasinusoidal, intraosseous or superficial) in the first and second premolar and molar regions were measured. The data was analyzed with the t tests, the one-way analysis of variance (ANOVA) and the χ2 tests. RESULTS: The maxillary PSAA was recognized in 187 (76.3%) scans. The mean distance between the artery and the floor of the sinus was 6.87 ±3.68 mm. The mean diameter of the artery was 1.37 ±0.61 mm. The greatest mean diameter of the artery was observed in the second premolar region, and the smallest in the first molar region. As many as 63.6% of the arteries were intraosseous, 28.9% intrasinusoidal, and 7.5% superficial. CONCLUSIONS: Due to the high prevalence of the intraosseous type, in most cases of sinus lift surgery there is an increased possibility of PSAA damage. As the largest diameter of the artery was observed in the second premolar region, the possibility of severe bleeding during sinus lift surgery in this area is increased. The average distance between the artery and the floor of the sinus was approx. 7 mm. Consequently, it is recommended that the lower border of the sinus access window should be as high as 7 mm to the floor of the sinus.

Analysis of the Prevalence, Location, and Morphology of Maxillary Sinus Septa in a Northern Chinese Population by Cone Beam Computed Tomography.

Purpose: The purpose of this study is to survey the prevalence and morphology of the maxillary sinus septum, which might increase the rate of maxillary sinus membrane perforation during maxillary sinus floor elevation surgery, among northern Chinese, and to further analyze the relationship between gender, age, edentulous type, and prevalence of maxillary sinus septa. Methods: The cross-sectional retrospective study was based on an analysis of Cone Beam Computed Tomography (CBCT) images of maxillary sinus which had been obtained from patients who visited radiology department of Beijing Stomatology Hospital of Capital Medical University (Beijing, China) during the period from January 2019 to December 2019. The data of demographic characteristic, prevalence, position, direction, and morphology of maxillary sinus septum were collected and further analyzed by SPSS version 25.0.1 and R version 3.5.1 software program. Results: 595 patients were included in this study, and 1190 maxillary sinuses were analyzed and the incidence rate of the sinus septum was 46.9%. 399 (33.5%) sinuses had one or more septa in 279 (46.9%) patients. In addition, maxillary sinus septa incidence showed no significant differences among gender, age, and edentulous type. The segment second molar had the highest incidence rate of septa. Conclusion: In this study, a higher incidence of the maxillary sinus septum was found in the northern Chinese, and its distribution varied with its position, morphology, and direction.

The pterygopalatine ganglion, palatine nerves and vessels: dissection and pathway / El ganglio pterigopalatino, nervios palatinos y vasos: disección y trayecto

SUMMARY: Background and Objectives: The palatine nerves and vessels cross the pterygopalatine fossa, the palatine canals, the palatine foramina and the submucosal space, at the level of the hard palate and the palatine recess of the maxillary sinus. Their trajectory is long, complicated and difficult to highlight on a single dissection piece. In the literature that we studied, we did not find clear images that fully highlight the real configuration of the pterygopalatine ganglion and nerves and of the palatine vessels. Our aim was to provide a clear and representative dissection of the pterygopalatine ganglion and of the palatine neurovascular bundle throughout its pathway in a simple, coherent and useful presentation for the practitioners interested in the regional pathology. We resected the posterior and inferomedial osseous walls of the maxillary sinus and highlighted the neurovascular structures in the pterygopalatine fossa and the wall of the maxillary sinus. We photographed the dissection fields and detailed the important relations. The images that we obtained are clear, simple and easy to interpret and use. We successfully highlighted the aspect and the main relations of the pterygopalatine ganglion and the pathway and distribution of the palatine nerves and vessels, from their origin to the terminal plexuses. There is a broad spectrum of clinical procedures or situations that require a proper knowledge and understanding of the anatomical pathway and relations of the palatine neurovascular elements. This includes the various types of regional anesthesia, tumor resection surgery, flaps of the palatine mucosa, the LeFort osteotomy etc. Demonstration of the pterygopalatine ganglion and its relations is useful in endoscopic interventions at the level of the pterygopalatine fossa.

RESUMEN: Los nervios y vasos palatinos atraviesan la fosa pterigopalatina, además de los canales palatinos, los forámenes palatinos y el espacio submucoso a nivel del paladar duro y el receso palatino del seno maxilar. Su trayectoria es larga, complicada y difícil de destacar en una sola pieza de disección. En la literatura que estudiamos, no encontramos imágenes claras que resalten completamente la configuración real del ganglio y los nervios pterigopalatinos y de los vasos palatinos. Nuestro objetivo fue proporcionar una disección clara y representativa del ganglio pterigopalatino y del haz neurovascular palatino a lo largo de su trayecto en una presentación simple, coherente y útil para los médicos interesados en la patología regional. Resecamos las paredes óseas posterior e inferomedial del seno maxilar y resaltamos las estructuras neurovasculares en la fosa pterigopalatina y la pared del seno maxilar. Fotografiamos los campos de disección y detallamos las relaciones importantes. Las imágenes que obtuvimos son claras, sencillas y de fácil interpretación. Resaltamos con éxito el aspecto y las principales relaciones del ganglio pterigopalatino y el trayecto y distribución de los nervios y vasos palatinos, desde su origen hasta los plexos terminales. En conclusion, existe un amplio espectro de procedimientos o situaciones clínicas que requieren un adecuado conocimiento y comprensión del trayecto anatómico y las relaciones de los elementos neurovasculares palatinos. Esto incluye los distintos tipos de anestesia regional, cirugía de resección tumoral, colgajos de mucosa palatina, osteotomía de LeFort, etc. La demostración del ganglio pterigopalatino y sus relaciones es útil en intervenciones endoscópicas a nivel de la fosa pterigopalatina.

Anatomical Changes in a Case with Asymmetrical Bilateral Maxillary Sinus Hypoplasia.

Background and Objectives: The maxillary sinus hypoplasia (MSH) is an occasional variation of the maxilla, occurring either unilaterally or bilaterally. Previous studies dealing with MSH have not detailed the consequent anatomical changes of the maxilla and adjacent fossae. Materials and Methods: A 58-year-old female case was scanned in Cone Beam Computed Tomography and found to have asymmetrical bilateral MSH, who was then further evaluated anatomically. Results: The maxillary sinuses were hypoplastic and had mild mucosal thickenings. The orbital floors were curved. The uncinate process and the ethmoidal infundibulum were laterally displaced beneath the orbit floor. On each side, the lateral nasal wall protruded within the respective maxillary bone to reach above the vestibular cortical plate of the alveolar process. This expansion of the lateral nasal walls was limited to the premolar and first molar regions. The inferior turbinates were laterally curved. The perpendicular palatine plate was building a postero-lateral nasal wall in front of the pterygopalatine fossa. Conclusions: The classification systems of MSH should be detailed to indicate whether the normal uncinate process is medial or inferior to the orbit. The lateral expansion of the lateral nasal wall in MSH is limited to the anterior part of that wall. The laterally expanded nasal fossa could reach anterior to the pterygopalatine fossa in MSH. Seemingly, CBCT is a better tool than CT to evaluate the detailed anatomy of the modified anatomical structures in MSH; as such, it could be of help in a surgical approach.

Comparison of biological and mechanical properties of different paranasal sinus mucosa in goat.

OBJECTIVE: The present study was designed to explore endurable pressure intensity of different paranasal sinus mucosa in goats. METHOD: Mucosa commonly involved in maxillary sinus augmentation, including mucosa from maxillary sinus crest, maxillary sinus floor, and frontal sinus, were harvested in a computed tomography-guided manner. The obtained mucosa was then sectioned into square and irregular ones for maximum endurable pressure intensity determination and morphological observation, respectively. RESULTS: Thickness of paranasal sinus mucosa, as determined under morphological staining by an optical microscope with a graduated eyepiece, were calculated. And the results showed that the average thickness of maxillary sinus crest mucosa, floor mucosa, and frontal sinus mucosa in goats were 410.03 ± 65.97 µm, 461.33 ± 91.37 µm and 216.90 ± 46.47 µm, respectively. Significant differences between maxillary sinus crest and frontal sinus, maxillary sinus floor, and frontal sinus were observed (P < 0.05). Maximum endurable pressure intensity was determined by utilizing a self-made clamp device and the results revealed maximum endurable pressure intensity of maxillary sinus crest mucosa, floor mucosa and frontal sinus mucosa in goats were 260.08 ± 80.12Kpa, 306.90 ± 94.37Kpa and 121.72 ± 31.72Kpa, respectively. Also, a statistically significant difference was observed when comparing the endurable pressure intensity between maxillary sinus crest and frontal sinus, maxillary sinus floor, and frontal sinus (P < 0.05). Further correlation analysis also revealed a positive correlation between the thickness of mucosa of the maxillary sinus and frontal sinus and maximum endurable pressure intensity (P < 0.05). CONCLUSION: Mucosal thickness and maximum endurable pressure intensity of maxillary sinus crest and floor were larger than that of frontal sinus mucosa and a positive correlation between the thickness of mucosa and endurable pressure intensity was observed. Our results thus might provide an experimental basis and guidance for mucosa-related problems involved maxillary sinus augmentation.

Three-dimensional quantification of the relationship between the upper first molar and maxillary sinus.

OBJECTIVES: The present study aims to describe the relationship between upper first molar roots and maxillary sinus, for the first time with a truly three-dimensional approach. METHODS: From a retrospective cone-beam computed tomography (CBCT) sample of the upper jaw, a total of 105 upper first molars in contact with maxillary sinus from 74 patients (male 24, female 50, mean age 42) were included in the present study. Segmentation of the upper first molar and maxillary sinus in CBCT was performed utilizing a semiautomatic livewire segmentation tool in MeVisLab v.3.1. The segmentations were analyzed in 3-matic Medical 20.0 for root volume and the contact area between upper first molar roots and maxillary sinus. Analysis of variance test was applied to detect statistically significant differences between the roots. RESULTS: The palatal root had the largest contact area with maxillary sinus 27.8 ± 21.4 mm2 (20% of the root area) followed by the mesiobuccal 20.5 ± 17.9 mm2 (17% of the root area) and distobuccal root 13.7 ± 12 mm2 (14% of the root area). A significant difference in the contact area of the different roots of the upper first molar was seen. CONCLUSIONS: This study showed that 70% of the upper first molars were in contact with the maxillary sinus. The palatal root had on average a fifth of its root surface in contact with the sinus, while for mesiobuccal this was a sixth of its root surface and distobuccal roots this was somewhat less. The true 3D relationship could help to better understand maxillary anatomy in relation to occurring pathologies and treatment planning in this area.

Anterior maxillary wall and lacrimal duct relationship in pediatric patients - CT analysis for the feasibility of the prelacrimal recess approach.

OBJECTIVE: The purpose of the current study is to determine the age-related feasibility rate of the intranasal endoscopic prelacrimal recess approach (PLRA) in pediatric patients. METHODS: Computed tomography (CT) images of 379 patients under 18 years old were analyzed retrospectively. The anteroposterior dimensions of the medial bony wall of the prelacrimal recess (PLR) were measured on 758 sides. The feasibility of the PLRA was evaluated according to the criteria of Simmen et al., for each age and three age groups based on trends in the change of the width of the PLR. RESULTS: Less than half (45.9%) of pediatric maxillary sinuses (MS) were found to have the favorable anatomy (width of PLR >3 mm) to perform the PLRA. The cut-off value for age regarding the feasibility of the PLRA was nine years old. Following an evaluation of the groups, the proportions of the MS with favorable anatomy for the PLRA were 5.7% in Group I (age 0-4 years), 33.3% in Group II (age 5-8 years), and 55.1% in Group III (age 9-17 years). In group III, the feasibility rate for the PLRA was greater in boys (62.1%) than in girls (48.3%). No difference in the feasibility rate was found between the right and left sides. CONCLUSION: The overall feasibility rate for the PLRA in pediatric patients under 18 years of age is 46%. In patients aged 9-17 years, the feasibility rate for the PLRA is >50%.

Radioanatomic study of maxillary sinus palatal process pneumatization.

OBJECTIVES: To perform a detailed analysis of palatal process pneumatization (PPP) on cone beam computed tomography (CBCT) images. METHODS: This study consisted of 376 maxillary sinuses of 188 patients aged 22-88 years who had maxillary CBCT scans. The radioanatomy of the PPP was evaluated at distances 4, 8, 16, and 24 mm posterior to incisive foramen. The types of PPP were classified as follows: type I: maxillary sinus palatal process non-gasified; type II: palatal process gasification into the nasal floor, but not more than half of the width of the nasal floor; and type III: palatal process gasification into the nasal floor more than half of the width of nasal floor. Sinus opening angle (SOA), palatonasal recess angle (PNRA), palatal junction angle (PJA), and palatal depth measurement (PDM) were the evaluated parameters. RESULTS: Among the identified 1315 PPPs, type I PPP (880, 66.92%) was the most frequently observed, followed by type II (426, 32.4%), and the least observed was type III PPP (9, 0.68%). There was no significant difference between SOA and PJA according to the types of PPP (p > 0.05). The difference between PNRA and PDM of type I and type II PPP showed a statistically significant difference (p < 0.05). Type I PPP was the most encountered with the highest PDM, and PNRA was narrower in type III than in type II PPP. CONCLUSION: Physicians must be aware of these variations to prevent possible complications during surgery because 33.08% of the maxillary sinuses showed extensive pneumatization through the palatal process.

A morphometric analysis of the immature human infraorbital canal.

PURPOSE: The importance of the infraorbital canal in the growth of the maxilla and associated mid-facial region has significance for innervation of this region as well as the associated dentition, yet little is known about the development of the canal. An analysis of its dimensions and morphology during the late prenatal and early postnatal periods was thus undertaken. The aim of this study was to describe changes in the morphology, size and branching pattern of the infraorbital canal during the late prenatal and early postnatal stages of human growth. METHODS: Fifty human fetal and neonatal maxillae were analyzed. The sample included 27 late prenatal individuals (30 gestational weeks and birth) and 23 early postnatal individuals (birth and 1 year). Maxillae were scanned using a Nikon XTH 225 L micro-CT unit and analyzed using VG studiomax v3.2. Measurements included the maximum width, height and surface area of each foramen associated with the infraorbital canal and the total length of the canal, bilaterally. RESULTS: All the measurements of the canal were greater in the early postnatal group than in the late prenatal group, while the walls and branching pattern of the canal were better developed in the postnatal group. Bone development occurred within the walls as development proceeded. Variations in the branching pattern of the canal were found. CONCLUSION: The morphology of the infraorbital canal reflected the developmental stage of associated structures such as the dentition, maxillary sinus and orbit.

Three-dimensional visualization of the alveolar bone and posterior superior alveolar foramen in gender.

The present study applied a three-dimensional (3D) program to measure the distances from the maxillary sinus floor (MSF) to the lingual and buccal alveolar bone and also to the posterior superior alveolar foramen (PSAF), with the aim of determining differences according to gender. The study also attempted to verify the accuracy of measurements obtained from 3D images by performing comparisons with the results obtained in a preliminary study. The results showed that the alveolar bone length and the MAF-PSAF were generally larger in males than in females. It is also predicted that the accuracy of data obtained from a 3D program will be higher than that of data derived from conventional two-dimensional (2D) images. The accurate measurements obtained in this study are anticipated to prove useful in assessments related to dental implantation and anatomical structures. The fundamental data obtained in this study may also assist in setting the goals of future studies utilizing 3D programs.

Surgical anatomy and nuances of the expanded transpterygoid approach to the pterygopalatine fossa and upper parapharyngeal space: a stepwise cadaveric dissection.

BACKGROUND: Superb knowledge of anatomy and techniques to remove the natural barriers preventing full access to the most lateral aspect of the skull base determines the ease of using the transpterygoid approach (ETPA) as the main gateway for all the coronal planes during endonasal surgeries. METHODS: Throughout stepwise image-guided cadaveric dissections, we describe the surgical anatomy and nuances of the ETPA to the pterygopalatine fossa (PPF) and upper parapharyngeal space (UPPS). CONCLUSION: The ETPA represents a lateral extension of the midline corridor and provides a valuable route to access the PPF/UPPS. Major landmarks for this EEA are the infraorbital canal, sphenopalatine foramen, and vidian nerve. It comprises the removal of the palatine bone, posterior wall of the maxillary sinus, and PPF transposition to drill the pterygoid process.